PLEASE NOTE: We are currently experiencing issues with the supply of standard birch plywood, [Europe is predominently supplied by RUSSIA], an alternative to consider is our POPLAR plywood. Drop down options above reflect thicknesses that remain available in small quantities, for bulk orders please email to confirm availability.
Plywood comprises of multiple layers of thin wood veneer glued together. Layers alternate the wood grain at 90 degrees making the material extremely strong and dimensionally stable. Laser grade plywood uses a resin better suited to laser cutting and leaves a light brown cutting edge in comparison to standard ply black/burnt edge.
Finishing
For internal use edges can be left unfinished. For external use / internal use where exposed to moisture painting or varnishing is recommended.
Cutting Edges / Cleaning
Cut / Etched parts will have some burn marks from the laser process. These marks can usually be removed using methylated spirits. Alternatively via a light sanding with fine grit paper (approx 200 grit). If required we can apply masking to the plywood before cutting to significantly reduce burn marks.
Cutting Offsets (kerf width / laser cut line width)
1-3mm thick material = approx. 0.15mm
4-6mm thick material = approx. 0.15mm
6-9mm thick material = approx. 0.20mm
Cutting Sizes
150mm x 150mm
300mm x 300mm
400mm x 600mm
(larger sizes may be available on request)
Design File
(dxf, dwg, ai, cdr, eps, slddrw, svg, zip, rar, tar, jpg, jpeg, png, gif, bmp). If it is a repeat order to existing artwork you can skip this step [clarify via the comments field]).
Uploaded designs to be formatted in accordance with our
design requirements, or start by select one of our standard templates.
