Black acrylic is a strong, stiff and durable thermoplastic (but can be brittle in small sections). As a thermoplastic it can be heated and shaped many times (e.g. if futher processing is required).
Acrylic has a high gloss finish that does not require further processing.
Cutting Edges / Cleaning
Laser cutting provides a mirror like edge that typically does not require further processing. Protective cover is applied to the face of the acrylic when cutting (and shipping) to protect from scratches.
Cutting Offsets (kerf width / laser cut line width)
1-3mm thick material = approx. 0.15mm
4-6mm thick material = approx. 0.15mm
6-9mm thick material = approx. 0.20mm
150mm x 150mm
300mm x 300mm
600mm x 600mm
(sizes upto 600mm x 1m on request)
(dxf, dwg, ai, cdr, eps, slddrw, svg, zip, rar, tar, jpg, jpeg, png, gif, bmp). If it is a repeat order to existing artwork you can skip this step [clarify via the comments field]).
Uploaded designs to be formatted in accordance with our design requirements
, or start by select one of our standard templates.